 |
|
GENERAL DESCRIPTION
The system controls the temperature of the oil bath.It stabilizes the temperature between a range of 103ºC to 105ºC and provides overheating protection at an oil temperature of 130ºC.
The controller ensures Reliability and a High Level of Safety for the heating system. Electronic P.C. board installed inside a self-extinguishing plastic enclosure for indoor use. Two temperature sensors, with 5 meter long cables each. Each sensor is encapsulated in a Ø 6.35 mm nickel-plated brass sleeve and connected to control box by standard female quick-connectors 6.3mm.
|
|
|
|
| SEPECIFICATIONS |
|
|
| Operation Voltage Range. |
230VAC±10%, 50/60Hz. |
|
| Temperature Control Accuracy. |
±1ºC |
|
| Sensors rated 50K at 25 ºC |
±10% accuracy |
|
| Sensors cables withstand up to |
150ºC |
|
| Differential |
1ºC |
|
| Timer's Accuracy |
±10% |
|
| 6.3 mm blades for inputs/outputs connections. |
|
|
| Two contactors rated at 30A@277VAC (Cos=1) for the one Heat Element. |
|
|
| Alarm actuator rated at |
5A/250VAC (Cos=1). |
|
| Power Transformer |
230VAC/12VAC/5VA |
|
| Microprocessor and accompanied accessories placed on double side PCB. |
|
|
| Reset push button. |
|
|
| Indicators (LED) Green & Red. |
|
|
| Cable clamps. 3 Units |
|
|
| Operation relative humidity 10% up to 90% (Non condensing). |
|
|
| Operating temperature |
(-)15°C up to (+)65°C. |
|
| Storage environment: (-)30°C up to (+)85°C, with 5% up to 95% RH, non-condensing. |
|
|
| Dimensions |
215 X 170 X 74 mm. |
|
|
