|
SENTRY 20 HOSE BREAKAWAY COUPLING
The sentry 20 is designed to provide assured drive-away protection in the dispensing of LPG to motor vehicles. Its corrosion resistance and ease of reconnection make it particularly useful for self serve enviroments. It is now specified by major LPG marketers for use with lpg dispensers.
|
FEATURES:
|
SPECIFICATIONS: |
|
|
|
|
|
|
|
-Simple reconnection in seconds without the need to depressure the hose, or special tools
|
Maximum operating pressure |
3000kPa |
|
|
|
|
|
|
-Seals immediately on separation (both halves) with less then 5ml liquid loss making it
super-safe and enviromentally responsible
|
Separation force |
35-60 kg |
|
|
|
|
|
-No possibility of premature separation due to temperature induced increased internal pressure
|
Liquid Loss on separation |
5 ml |
|
|
|
|
|
|
|
-Integral swivel eliminates kinking of hose or tendency to undo itself |
Pressure Drop |
120 kPa
(at 50lt.min)
|
|
|
|
|
|
|
|
-Three point design to eliminate corrosion (plastic external sleeves, CADmium platting of all metal components and seals to prevent water entry to internal parts) mininises the risk of non-operation due to corrosion, and maximises life.
|
Connections |
20mm NPT |
|
|
|
|
|
|
|
-Plastic and rubber external sleeves and minimal mass of portion attached to the vehicle end of the hose
minimises the risk of damage to equipment and vehicles
|
Total Mass |
1.2 kg |
|
|
|
|
|
|
|
-Reliable operation at very low remperatures (down to -40 0C)
|
Mass of anchored portion |
0.9 kg |
|
|
|
|
|
|
|
-UL Listed and Standards Australia approved (UL 15X0)
|
Mass of separation portion |
0.3 kg |
|
|
|
|
|
|
|
