CLICK HERE FOR SPECIFICATIONS A distinctively different dispenser for a distinctively different fuel.

Only one thing is certain in the retailing of automotive fuels today - that the pace of change in the type and variety of fuels used and the way they are marketed will be more dramatic in the next few years than has ever previously been the case.

Many consider that LP Gas is the automotive fuel of the future. Concept 2000 is an innovative new LP Gas dispenser from the LP Gas experts, designed to keep pace with your changing needs and to maximise sales and returns from this unique fuel.

Why accept a compromise design when you can have the best?

Key concepts incorporated in Concept 2000:

Design consistent with modern petrol pumps.	Consistency of site image.
Compact Size.	Optimises site utilisation.
Hoses kept clear of dress panels.	Unobstructed visibility of corporate signage.
Optional overhead light-box for display of corporate signage or fuel grade information.	Assures optimum visibility.
Optimum durability.	The use of highly durable materials (plated & stainless steel, high-tech plastics), powder coating and proven electronic and hydraulic components assures you minimal maintenance costs for many years.
Elimination of horizontal surfaces.	Minimises risk of damange to painted surfaces.
Robust frame construction.	Assures optimal protection for dispenser hydraulics.
Nozzle boots recessed inside line of dress panels and hoses suspended from end of column rather than lane side.	Minimises risk of nozzles being knocked out of holders.
Advanced hydraulic design.	Optimal accuracy, consistent performance, extended reliability, exceptional safety.
Modular hydraulic & electronic design.	Easy on-site single-to-dual upgrade. Facilitates service.
Optional versions of electronics.	Match communications to existing site requirements.
Easy service access.	Minimises down-time.

SPECIFICATIONS

GENERAL SPECIFICATIONS
Concept 2000 consists of separate hydraulic and electronic modules, mounted in a substantial steel frame. Ease of access to both modules is assured by removable panels secured by keyed locks.

Hoses are suspended from cable retraction systems.

Both single and dual versions are available.

Standards Compliance:

Concept 2000 is approved by all relevant authorities in Australia, including The National Standards Commission and Standards Australia.

Design complies with AS2229.2 (Liquefied Petroleum Gas Dispensing Equipment), AS1596, AS3000 and other applicable Australia Standards. Typically these are equivalent to similar European, North American and other international standards.

Specific information can be provided on request.

Frame & Panels:

3mm zinc plated mild steel, or 2mm stainless steel structure frame
External surfaces stainless steel, powder coated stainless steel or zinc plated mild steel, or fibreglass
Internal metal surfaces plated and (in some cases) powder coated

Hydraulics:

Basic hydraulic module is mounted on a separate sub-frame, facilitating removal for service or upgrade. Both single and dual hose versions are available.

Hydraulic system is comprised of:

Batchen dual piston, double acting meters (glandless meters available as an option).
Batchen vapour eliminator/filter assembly:

Type Constant bleed
Volume 1,233 ml
Filter mesh 50 micron
Filter area 200 cm², 41% open

Batchen differential valves.

	
	Standard operating pressure 2 bar (others available)

Batchen Sentry 20 hose break-away couplings.
LGE Gasguard "Pressure Seal" technology hose nozzles:
- 1 3/4" Acme car filler connection (others available)
- 1/2" or 3/4" NPT inlet swivel
Automatic vapour detection/density monitoring is available as an option (in this case the differential valve is not required)

Performance:

Recommended minimum flow rate	10.0 litres/minute
Recommended maximum flow rate	60.0 litres/minute
Maximum operating pressure	23.8 bar
Liquid temperature range	-10^oC TO +45^o
Accuracy	+/- 0.4%

Connections:

Liquid inlet flange	32mm x Class 300 ANSI (others available on request)
Vapour return flange	20mm x Class 300 ANSI (others available on request)

Electrical Equipment:

All electrical equipment is Explosion Proof protected by one or more of the following techniques:

ZONE I & II	ZONE II ONLY
Intrinsically safe (Ex ia or ib, AS 2380.7)	Non-sparking (Ex n, AS 2380.9)
Flameproof enclosure (Ex d, AS 2380.2)	--
Increased Safety (Ex e, AS 2380.6 - Cable terminations only)	--
Encapsulated (Ex m, AS 2431)	--

Various electronic options are available; this results in some variance in detailed specifications. The following are typical:

Functional Specifications:

Micro-processor controlled operation and volume/price computation.
Non-volatile or battery maintained memory (minimum 20 days).
Dual channel pulsers with self error checking.
Automatic temperature compensation.
Large back-lit Liquid Crystal displays.
Optional electronic vapour detection/density monitoring.
Optional preset value and/or volume to be dispensed.

Performance Specifications:

Total volume display range	0-999.00 units
Total value display range	0-99999 units (variable decimal point)
Price per unit display range	0.99999 units (variable decimal point)
Cumulative volume range	Up to 9999999999 units (dependent on model)
Cumulative value range	Up to 9999999999 units (dependent on model)
Maximum metering resolution	2 millilitres or equivalent (@ 100 litres/minute) 1 millilitre or equivalent (@ 50 litres/minute)
Calculation accuracy	Rounded to the nearest sub-unit of currency
Data retention	Minimum 20 days

Electrical & Environment Specification:

Mains supply (specific at time of order)	110 - 240 Volt, 50/60 Hz
Operating temperature range	-20^o to +45^oC ambient
Humidity range	0 - 90% (non condensing)

Type	Constant bleed
Volume	1,233 ml
Filter mesh	50 micron
Filter area	200 cm², 41% open